Files from printables.com
=========================

https://www.printables.com/model/555123
  * BASE.stl
  * LID (NOLOGO).stl
  * LATCH.stl
  * GASKET.stl
  * PINECIL_6ML SYRINGE INSERT (BASE).stl
  * 6-TIP INSERT (TS100 SHORT TIPS).stl
  * STORAGE LID.stl

https://www.printables.com/model/481888
  * Stand_New_Strong_M8nut.stl

https://www.printables.com/model/237958
  * ReelTop.stl
  * ReelBottom.stl



Modifications
=============

6-TIP INSERT (TS100 SHORT TIPS) modified.scad
  * Slightly longer tip compartment (to fit tips from https://www.aliexpress.com/item/1005005574821395.html)
  * Tighter tip clips
  * Tighter reel clips
  * Narrower small compartment to fit width of sponge (reichelt.de "SCHWAMM")
  * Enlarged magnet holes to fit 3 mm x 1.5 mm magnets

STORAGE LID MAGNET_3x1.5.scad
  * Enlarged magnet holes to fit 3 mm x 1.5 mm magnets

Reel_combined.scad
  * Single-part reel. Print with supports for horizontal surfaces.



Additions
=========

screwdriver-2mm.scad
  *  Clip for a tiny screwdriver with 2 mm shaft diameter. Superglued to the case insert.



Objects to print
================

Printer: Prusa MK3S+

PLA, Profile: "0.3mm DRAFT", variable layer height
  1x BASE.stl
  1x LID (NOLOGO).stl

PETG, Profile: "0.3mm DRAFT", variable layer height
  1x PINECIL_6ML SYRINGE INSERT (BASE).stl
  1x 6-TIP INSERT (TS100 SHORT TIPS) modified.stl

PETG, Profile: "0.2mm QUALITY"
  2x LATCH.stl
  1x Stand_New_Strong_M8nut.stl
  1x STORAGE LID MAGNET_3x1.5.stl
  1x screwdriver-2mm.stl

PETG, Profile: "0.2mm QUALITY", Supports: enabled, Overhang threshold: 30 degrees, Style: snug
  2x Reel_combined.stl

Flex, Profile: "0.15mm QUALITY"
  1x GASKET.stl



Licence
=======

(CC) BY-NC-SA, https://creativecommons.org/licenses/by-nc-sa/4.0/